Description
ThyssenKrupp Elevator Display Board TCIS-104TNV-G5 Brief Introduction
|
Product Name
|
ThyssenKrupp Elevator Display Board |
|
Model
|
TCIS-104TNV-G5/G7
|
|
Quality
|
Original.Brand New
|
|
Payment
|
T/T. Paypal. Western Union
|
|
Delivery
|
3-5 Working Days
|
|
Packaging
|
Packed by carton
|
ThyssenKrupp Display Board TCIS-104TNV-G5 – 10.4″ of Crystal-Clear Ride Information | Nanjing Zhuye Elevator Parts
The first thing passengers notice when they enter a lift is the floor indicator. The ThyssenKrupp TCIS-104TNV-G5 TFT display turns that glance into a premium experience: 10.4-inch high-brightness screen, rich colour depth and wide viewing angles deliver floor numbers, arrows, video adverts and fire-service messages with equal clarity. When pixels fade or the backlight flickers, the car suddenly looks old and unsafe. Nanjing Zhuye Elevator Parts keeps genuine TCIS-104TNV-G5 boards in original packaging, ready for same-day despatch to any continent, helping contractors restore a modern, trustworthy cabin appearance without costly OEM delays.
Product snapshot
-
ThyssenKrupp part number TCIS-104TNV-G5, revision G5, firmware TCIS-FW-5.3
-
10.4-inch TFT LCD, 800 × 600 SVGA, 400 cd/m² brightness, 800:1 contrast
-
LED backlight, 50 000 h lifetime, dimmable 0-100 % via software
-
24 V DC ±10 %, 12 W typical, 15 W max, reverse-polarity protected
-
RGB analogue + HDMI 1.4 digital inputs, auto-detect switching
-
ARM Cortex-A7 media processor, 256 MB DDR3, 512 MB NAND flash
-
On-board 8 Ω 2 W amplifier for voice announcements, 3.5 mm line-out jack
-
Operating temperature −10 °C to +60 °C, humidity 5-95 % RH non-condensing
-
IP20 aluminium heat-spreader frame, 255 × 175 × 30 mm, 0.6 kg
-
CE, FCC, RoHS certified, flame class UL 94-V0
Where it works
-
ThyssenKrupp EVOLUTION, ES-P, ES-G, ES2000 and TWIN systems
-
Modernisation packages replacing 7-segment or CRT indicators
-
Any controller outputting RGB or HDMI floor signal, 0-5 V or 0-10 V brightness control
-
Suitable for both car-top mounting (horizontal) and COP flush mounting (vertical) with supplied angle brackets
Installation method – 10-minute plug-and-play
-
Place lift on inspection mode; switch OFF main breaker.
-
Remove old indicator: release four plastic clips or M4 screws; withdraw unit.
-
Photograph existing cable layout; note RGB/HDMi and 24 V polarity.
-
Connect 24 V DC (red +, black −) to X1; torque 0.5 Nm.
-
Plug RGB 15-pin D-SUB or HDMI cable into X2; secure locking screws finger-tight.
-
If audio used, connect 3.5 mm jack to X3.
-
Power up; screen shows ThyssenKrupp logo within 3 s, then auto-switches to floor signal.
-
Adjust brightness: press hidden tactile button → OSD menu → brightness 70 % for typical cabin.
-
Cycle car to top and bottom floors; confirm arrow direction and colour change.
-
Seal cable entries with supplied grommets; update maintenance log with serial number.
Replacement cycle & maintenance
Although solid-state, display boards live in a harsh world—vibration, summer heat and voltage spikes. ThyssenKrupp bulletin TB-TFT-2024 recommends:
-
Visual inspection every 6 months: clean dust from ventilation slots, check for swollen electrolytic caps.
-
Back-life timer: replace when on-screen hours > 45 000 h (≈ 9 years @ 14 h/day).
-
Immediate replacement if:
– backlight flickers or dark zones appear,
– RGB colours invert (LVDS contact failure),
– on-screen “NO SIGNAL” although controller outputs correctly,
– temperature > 70 °C on heat-spreader (fan failure).
Pro tip: 70 % of premature failures are traced to loose HDMI connectors—re-seat and apply thread-locker every year.
Maintenance tips from Nanjing Zhuye Elevator Parts
-
Always use shielded HDMI cable < 2 m to avoid digital sparkles.
-
Never hot-plug 24 V during lift run—spikes can kill the DC-DC converter.
-
Keep a spare TCIS-104TNV-G5 in every service room; at 0.6 kg it fits in a toolbox and saves a callback.
-
After lightning storm, check 24 V ripple < 1 V; high ripple overheats the LED driver.
-
Order the “Display Kit” (board + 2 m HDMI cable + 24 V harness) from Nanjing Zhuye Elevator Parts to eliminate on-site splicing.
Why buy from Nanjing Zhuye Elevator Parts?
We import TCIS-104TNV-G5 directly from ThyssenKrupp’s Czech assembly centre, flash the latest firmware, age-test every screen for 2 h at 60 °C and ship with a 24-month replacement warranty. Stock is stored in anti-static trays to prevent connector corrosion. Orders placed before 15:00 China time leave the same evening via DHL Express, arriving Europe or North America in 2–4 days. Bulk pricing starts at five pieces; we can pre-load your logo splash-screen and include a loaner unit to keep cabins bright during the swap.
Conclusion
The TCIS-104TNV-G5 display is the face your passengers judge every ride. By installing the genuine ThyssenKrupp board, setting brightness to spec and replacing it before the backlight fades, you turn every journey into a silent advertisement for quality and safety. Stock genuine TCIS-104TNV-G5 from Nanjing Zhuye Elevator Parts today—because when the screen goes black, the whole building looks outdated.
