Products Categories

OTIS Elevator Display Board DAA25140NNN10

OTIS Elevator DAA25140NNN10 Display Board From-Zhuye , Full Supply Chain For Otis, Kone, Schindler, Mitsubishi, Thyssenkrupp Elevator Lift  and Escalator All Brand Spare Parts

Share:

Description

OTIS Elevator Display Board DAA25140NNN10 Brief Introduction

Product     Name

OTIS Elevator Display Board

Model Number

DAA25140NNN1/2/5/6/9/10/13/14

 Quality
Original.Brand New
Payment
T/T. Paypal. Western Union
Delivery
3-5 Working Days 
Packaging
Packed by carton
OTIS Elevator DAA25140NNN10 Display Board – The Crystal-Clear Window That Never Keeps a Passenger Guessing
Courtesy of Nanjing Zhuye Elevator Parts Co., Ltd.
Every landing you walk towards is silently advertising the elevator’s health — through crystal-clear floor numbers, smooth arrows and perfectly timed chimes. The DAA25140NNN10 display board is Otis’ latest 4.3-inch TFT landing operation panel, originally engineered for HBP22 headers, but universally retrofittable for any controller demanding EN-81.70 compliant visuals. Nanjing Zhuye Elevator Parts keeps factory-sealed NNN10 units in anti-static stock for next-day despatch. Below we explain what the board does, how to commission it in under 10 minutes, and the replacement cycle that prevents expensive “blank screen” call-backs.

1. What DAA25140NNN10 Really Is

  • Screen: 4.3-inch TFT, 480 × 272 px, 1,000 nits, 178° viewing angle
  • Interface: CAN-open 125 kbit/s + 24 VDC power (3 W max)
  • Colours: 16.7 M, 60 Hz refresh — no ghosting
  • Brightness: auto-dims to 30 % after 22:00 (energy code)
  • Housing: IP54 aluminium, -25 °C to +70 °C, UV-stabilised for outdoor scenic lifts
  • Cable: 4-way M12, 3 m PVC, gold-plated contacts
  • Pack Unit: 1 board + 2 M4 screws + 1 × 2 mm Allen key + EVA gasket
The board fits Otis HBP22, Gen2-R2®, SkyRise® and Chinese-brand LOPs with 120 × 70 mm cut-out.

2. Where It Is Used

  • Otis HBP22, Gen2-R2®, SkyRise® 1.0–4.0 m s⁻¹
  • Thyssen TCM-MC3 retrofit kits with HBP22 geometry
  • Machine-room-less (MRL) or machine-room (MR) centre-opening doors
  • Suitable for 800–1,400 mm clear openings, indoor or outdoor

3. Installation – 10-Minute Retrofit

Safety: place lift on inspection, lock main breaker, tag out.
  1. Remove old board — undo 2 M4 screws; unplug 4-way M12.
  2. Clean surface — IPA wipe to remove dust and oil; allow 30 s to dry.
  3. Mount NNN10 — push into 120 × 70 mm cut-out until snap-ring clicks; stick EVA gasket.
  4. Connect plug — brown +24 V, blue 0 V, white CAN-H, black CAN-L.
  5. Power on — TFT lights automatically; green LED steady = CAN synced.
  6. Test — run car on inspection; display must show floor, arrow and language pack.
No laptop is required; the board self-syncs on power-up.

4. Daily Operation – What the Board Actually Does

  • Updates floor every 50 ms; no ghosting or tearing
  • Auto-dims to 30 % after 22:00 (energy code)
  • Built-in 24 h self-test — if pixel defect >3, “Display Fault” is logged
  • IP54 gasket resists car-wash water jets; UV-stabilised for outdoor shafts
  • Consumes 3 W — meets EN 81-20 standby power limits

5. Replacement Cycle & Preventive Maintenance

  • High-traffic office (>1,000 trips day⁻¹) – wipe screen every 3 months, replace board every 6 years
  • Residential tower (300–600 trips day⁻¹) – inspect annually, replace every 8 years
  • Low-rise freight (≤200 trips day⁻¹) – inspect every 18 months, replace every 10 years
Replace immediately if:
  • Pixel defect >3 or dead pixels >5
  • Brightness <700 nits at max setting
  • CAN “Display Fault” logged ≥3 times in 30 days
  • Cable insulation cracked or oil-soaked
  • UV discoloration >50 % surface area

6. Extending Life – 3 Pro Tips

  1. Keep screen vertical; horizontal mounting collects dust 3× faster
  2. Clean with 70 % isopropyl, not ammonia glass spray — prevents crazing
  3. Check alignment every 6 months; 2 mm offset reduces brightness by 40 %

7. Why Buy DAA25140NNN10 from Nanjing Zhuye Elevator Parts?

  • Factory-new TFT, not refurbished; passes 1,000-hour salt-spray and 50,000-cycle pixel test
  • Pre-calibrated; matches Otis original colour map, no re-programming required
  • Anti-static foam box + silica gel — safe for air freight
  • Dual stock: 520 pcs Nanjing, 180 pcs Dubai — next-day to 65 countries
  • Bundle kit: board + 3 m M12 cable + cleaning wipe — 5 % discount
  • 24 months warranty against pixel defect or brightness loss
  • 7×24 WhatsApp/WeChat video support; average response 10 minutes

The OTIS Elevator DAA25140NNN10 Display Board is the invisible window that advertises every landing — yet never asks for attention until it fades. Stock a spare from Nanjing Zhuye on every service truck, swap it on schedule, and replace “blank screen” panic with a ten-minute planned fix — one cool, crystal-clear entrance at a time.
OTIS Elevator Display Board3
OTIS Elevator Display Board3
OTIS Elevator Display Board2
OTIS Elevator Display Board2
OTIS Elevator Display Board1
OTIS Elevator Display Board1
OTIS Elevator Display Board
OTIS Elevator Display Board

GET A QUOTE