Description
Elevator Door Operator Motor ADR200-S02D-SL
|
Product Name |
Elevator Door Operator Motor |
| Model Number |
ADR200-S02D-SL |
|
Quality
|
Original.Brand New
|
|
Payment
|
T/T. Paypal. Western Union
|
|
Delivery
|
3-5 Working Days
|
|
Packaging
|
Packed by carton
|
Elevator Door Operator Motor ADR200-S02D-SL: High-Precision Drive Component from Nanjing Zhuye Elevatorparts
The Elevator Door Operator Motor ADR200-S02D-SL is a high-performance frequency conversion drive motor, specially engineered as the core power unit for modern elevator door systems. It delivers stable, quiet, and efficient power to control the synchronous opening and closing of car doors and landing doors, directly determining the safety, comfort, and operational efficiency of the elevator door system. Exclusively supplied by Nanjing Zhuye Elevatorparts, this motor fully complies with international standards such as EN 81-1 and national standard GB/T 18488-2015, with a rated power of 200W, input voltage of 1PH AC 220-230V 50/60Hz, and output of 3PH AC 0~230V, featuring excellent speed regulation performance and strong compatibility. It is widely matched with mainstream elevator brands including Otis, Schindler, and domestic well-known brands, applicable to residential buildings, commercial complexes, office towers, and public facilities, meeting diverse elevator door system configuration needs.
Nanjing Zhuye Elevatorparts adheres to stringent quality control standards, and the ADR200-S02D-SL door operator motor is a perfect embodiment of this commitment. Each motor undergoes rigorous pre-delivery testing, including high-low temperature (-25℃ to 85℃) resistance tests, noise level detection (≤55dB under no-load condition), insulation resistance verification (≥2MΩ with 500V megohmmeter), and torque performance calibration. It adopts high-quality copper windings and silicon steel sheet core to enhance energy efficiency and reduce power consumption, while the enclosed cast aluminum shell ensures excellent dustproof and waterproof performance, adapting to harsh operating environments in elevator hoistways. Equipped with a sealed deep-groove ball bearing and high-temperature resistant lubricating grease, it supports long-term stable operation without abnormal noise, and the built-in overcurrent, overheating, and undervoltage protection functions effectively prevent motor damage from abnormal working conditions, with a standard one-year warranty.
Usage Guide for Elevator Door Operator Motor ADR200-S02D-SL
Proper installation, wiring, debugging, and daily maintenance are crucial to maximizing the service life and performance of the ADR200-S02D-SL motor. In line with elevator maintenance safety principles and GB 50254-2014 electrical installation specifications, Nanjing Zhuye Elevatorparts strongly recommends all operations be performed by certified elevator maintenance technicians. Before installation, confirm the ADR200-S02D-SL model matches the elevator door operator and control system. For detailed wiring diagrams, terminal definitions, parameter settings, and installation dimensions, refer to Nanjing Zhuye Elevatorparts’ product manual or contact our technical support team. Note: Cut off the main power supply and lock the switch before operation, wear protective gear, and ensure a dry, well-ventilated, dust-free installation environment.
1. Pre-Installation Preparation
First, cut off the elevator’s main power supply and lock the switch to prevent accidental startup, then move the car to the middle floor for a safe operation space. Prepare professional tools: torque wrench, cross screwdriver, 500V megohmmeter, level ruler, wire strippers, and insulation tape. Clean the door operator bracket installation position thoroughly to remove dust, rust, and oil stains—key to ensuring installation accuracy. Carefully inspect the ADR200-S02D-SL motor for external damage (cracked shell, loose terminals, damaged connectors). Use a megohmmeter to test insulation resistance and winding continuity, ensuring no internal faults. Check matching components (transmission belts, pulleys, door operator controllers) for wear or deformation, replacing damaged parts in advance for smooth coordination, and confirm the controller’s parameter compatibility with the motor.
2. Installation & Wiring
Fix the ADR200-S02D-SL motor on the door operator bracket with high-strength hexagon bolts, using a level ruler to ensure horizontal installation (tolerance ≤±1mm) to avoid operation vibration. Tighten bolts according to specified torque (M8 thread: 8-10N·m) to prevent long-term vibration loosening. Follow Nanjing Zhuye Elevatorparts’ wiring diagram to connect power wires, control signal wires, and encoder wires to the controller, strictly complying with terminal definitions—main circuit terminals U/V/W for three-phase power output, L/N for two-phase power input, and control circuit terminals for door opening/closing signals, curtain signals, and encoder signals (12V power, A/B phase signals, COM). Control wire stripping length to 6-8mm, ensure firm terminal connections, and wrap with insulation tape to prevent short circuits. Separate power and signal wires (spacing ≥30cm) to reduce electromagnetic interference, organize wires neatly with cable ties, and install the protective cover after wiring to prevent dust entry.
3. Debugging & Daily Maintenance
After installation, restore power and start debugging. Use the door operator controller to set parameters such as rated speed, acceleration/deceleration time, and torque limit to match the ADR200-S02D-SL motor; parameter modification follows standard operation: press the “MODE” key to switch menus, press “SET” to enter parameter adjustment, and use “▲” and “▼” keys to modify values, then press “SET” to confirm. Note that parameters like P08, P09, and P43 cannot be modified online and must be adjusted after pressing the “STOP” key. Run no-load for 5-10 minutes to check for abnormal noise, vibration, or overheating, then conduct load testing by running through all floors in maintenance mode to verify smooth door operation. For daily maintenance, follow TSG T5002—2017 regulations: Clean the motor shell monthly; inspect bolts, terminals, and belts. Every 6 months, test insulation resistance and replace bearing lubricating grease. For harsh environments, double inspection frequency and apply anti-rust agent to metal parts.
Replacement Cycle of Elevator Door Operator Motor ADR200-S02D-SL
The ADR200-S02D-SL’s replacement cycle depends on usage frequency, operating environment, and maintenance quality, referring to scientific maintenance cycle calculation methods and industry data. Under normal conditions—12-24 hours daily operation, regular maintenance, dry environment—Nanjing Zhuye Elevatorparts recommends 5-7 years. This cycle is based on field test data and industry standards, considering winding aging, bearing wear, and insulation degradation, combined with the motor’s average no-fault time (MTBF).
For high-traffic areas (airports, subway stations) or harsh environments (high humidity, heavy dust), shorten the cycle to 3-5 years. High-frequency operation accelerates component wear, while harsh conditions cause corrosion and circuit faults. For low-usage elevators (villas, small offices), proper maintenance extends the cycle to 7-9 years. Motors over 6 years old require semi-annual professional inspections by Nanjing Zhuye Elevatorparts technicians, based on state monitoring data to assess replacement needs in advance.
Replace immediately if: Abnormal noise, severe vibration, or frequent overheating (surface temperature >85℃); insulation resistance <0.5MΩ; speed regulation failure due to parameter mismatch or component damage; insufficient torque; severe shell corrosion; frequent door faults; failed annual safety inspection. Use 100% genuine ADR200-S02D-SL motors from Nanjing Zhuye Elevatorparts to ensure compatibility and safety.
The ADR200-S02D-SL from Nanjing Zhuye Elevatorparts integrates reliability, efficiency, and precision, ideal for elevator door system maintenance and new installations. Backed by strict quality control, mature technology, and comprehensive after-sales service, we provide genuine components and professional support including wiring guidance and parameter debugging. Choose Nanjing Zhuye Elevatorparts and the ADR200-S02D-SL to ensure long-term safe, stable elevator door operation.
