Description
Elevator push button AN181G01 AN180 Brief Introduction
|
Product Name |
Elevator push button |
| Model Number | AN181G01
AN180 |
|
Quality
|
Original.Brand New
|
|
Payment
|
T/T. Paypal. Western Union
|
|
Delivery
|
3-5 Working Days
|
|
Packaging
|
Packed by carton
|
Elevator Push Button AN181G01 AN180 – Nanjing Zhuye Elevatorparts
The elevator push button is the direct interaction interface between passengers and the elevator system, serving as the “command center” for initiating elevator calls and floor selections. The Elevator Push Button AN181G01 & AN180 provided by Nanjing Zhuye Elevatorparts are high-reliability operation components tailored for modern elevator systems. Covering two mainstream models (AN181G01 and AN180), they are widely compatible with mainstream elevator brands such as Schindler, OTIS, and KONE, suitable for both passenger and freight elevators. These buttons feature sensitive triggering, clear indicator lights, and durable structures, ensuring accurate transmission of passenger operation commands. Crafted with high-quality ABS shells, metal contact sheets, and energy-saving LED indicators, they meet international elevator safety standards (EN 81-20, GB 7588) and have become a trusted choice for global elevator maintenance teams and manufacturers.
Nanjing Zhuye Elevatorparts adheres to the core philosophy of “Sensitive Operation, Durable Use” and implements strict quality control throughout the production process of the AN181G01 & AN180 elevator push buttons. Each unit undergoes rigorous testing, including triggering sensitivity verification, contact wear testing, LED life assessment, and environmental adaptability detection. The button’s ABS shell has excellent impact resistance and scratch resistance, with a smooth surface that is easy to clean. The internal metal contact sheets have a mechanical life of ≥ 1 million times, ensuring sensitive triggering even after long-term high-frequency use. The built-in LED indicator adopts energy-saving technology, with a service life of ≥ 50,000 hours and clear brightness that is visible even in strong light. The buttons support a wide voltage range (DC 12V-24V) and have good anti-interference performance, adapting to the complex electrical environment of elevator control systems.
Usage Guide for Elevator Push Button AN181G01 AN180
Correct installation, operation, and maintenance are crucial to ensuring the reliable performance of the AN181G01 & AN180 elevator push buttons. Nanjing Zhuye Elevatorparts recommends that only certified elevator maintenance technicians perform installation and replacement operations, while passengers should follow standard operation methods to extend the button’s service life.
1. Pre-Installation Preparation
1. Pre-Installation Preparation
First, confirm that the elevator’s MAC car lighting controller model matches the POWCV24181MH power supply (check parameters such as input voltage, output voltage, output current, and installation dimensions). Consult Nanjing Zhuye Elevatorparts’ technical team if there is any uncertainty about compatibility. Then, cut off the elevator’s main power supply and the secondary power supply for the car lighting system, lock the switch, and place a “Maintenance in Progress” warning sign at the elevator landing doors and machine room entrance. Locate the power supply installation position (usually on the car top or in the car control cabinet) and clean the area to remove dust, debris, and oil stains. Finally, prepare professional tools such as a screwdriver, wire stripper, multimeter, and insulation tester, and check that the new POWCV24181MH power supply from Nanjing Zhuye Elevatorparts is intact (no damage to the shell, no loose pins).
First, confirm that the elevator control panel model matches the AN181G01 or AN180 push button (check parameters such as installation hole size, voltage, and pin definition). Consult Nanjing Zhuye Elevatorparts’ technical team if there is any uncertainty about compatibility. Then, cut off the elevator’s main power supply and the secondary power supply for the control panel, lock the switch, and place a “Maintenance in Progress” warning sign at the landing doors. Remove the elevator control panel cover (use a screwdriver to loosen the fixing screws) and locate the button installation position. Finally, prepare professional tools such as a screwdriver, wire stripper, multimeter, and contact cleaner, and clean the button installation hole and surrounding area to remove dust and debris.
2. Installation & Wiring
If replacing the old button, first take photos to record the wiring positions and pin connections of the old button for later reference. Press the snap fasteners on both sides of the old button to take it out of the control panel, then disconnect the wires from the pins (mark the wires according to the photos). Take the new AN181G01 or AN180 button from Nanjing Zhuye Elevatorparts, connect the wires to the corresponding pins strictly following the photos and the wiring diagram provided by Nanjing Zhuye—ensure tight connections and correct pin correspondence (wrong wiring may cause the button to fail or the indicator light to not work). Insert the new button into the installation hole until it snaps into place, then gently press the button to confirm it is firmly fixed. Use a multimeter to test the button’s on-off status (closed when pressed, open when released) and the indicator light’s power supply.
Debugg3. Operation & Daily Maintenance
Install the control panel cover back, restore the power supply, and test the button’s function: Press the button to confirm it triggers sensitively, the indicator light turns on normally (and goes off after the elevator arrives), and the elevator can accurately respond to the call or floor selection command. For daily maintenance, passengers should avoid hitting or prying the button with hard objects; use a soft cloth to clean the button surface regularly. Maintenance technicians should inspect the buttons during monthly patrols: Check if the button is loose, stuck, or unresponsive; confirm the indicator light is bright and uniform; check the wiring pins for oxidation or looseness (clean with contact cleaner if necessary). For elevators in high-traffic areas, increase the inspection frequency to biweekly.
Replacement Cycle of Elevator Push Button AN181G01 AN180
The replacement cycle of the AN181G01 & AN180 push buttons is closely related to usage frequency and operating environment. Under normal circumstances (elevator daily operation 12-24 hours, daily button pressing times ≥ 1500, operating environment dry and low-dust), Nanjing Zhuye Elevatorparts recommends a replacement cycle of 2-3 years. This cycle is determined based on long-term field operation data, contact wear tests, and LED life assessments, fully considering the wear of internal contact sheets and the attenuation of LED brightness.
For elevators in high-traffic areas (e.g., large shopping malls, airports, subway stations with daily button pressing times ≥ 3000) or harsh environments (e.g., coastal areas with high salt spray, public places with heavy dust, high-humidity regions), the replacement cycle should be shortened to 1-1.5 years. High-frequency pressing accelerates contact wear, while harsh environments cause corrosion of the shell and pins and affect the LED’s service life. For low-usage elevators (e.g., villa elevators, small office buildings with daily operation time < 8 hours) in stable environments, the cycle can be extended to 3-4 years, but only after inspection and confirmation by Nanjing Zhuye’s technicians that the button’s triggering sensitivity and indicator light performance meet standards.
Replace the button immediately if any of the following issues occur, regardless of its service life: The button is stuck, unresponsive, or triggers falsely; the indicator light is dim, flickering, or fails to turn on; the button shell is severely cracked, damaged, or falls off; the internal contacts are burned (accompanied by a burning smell) due to poor contact; the wiring pins are severely oxidized or corroded, causing the button to fail intermittently.
The Elevator Push Button AN181G01 & AN180 from Nanjing Zhuye Elevatorparts integrate sensitivity, durability, and compatibility, providing reliable operation support for elevator systems. By following the correct usage, maintenance, and replacement guidelines, you can effectively ensure the smooth interaction between passengers and the elevator, reduce operation failures caused by button problems, and improve passenger riding experience. Choosing Nanjing Zhuye Elevatorparts means you get 100% authentic AN181G01 & AN180 push buttons, as well as professional services including model matching, on-site installation guidance, and timely after-sales support. Trust Nanjing Zhuye Elevatorparts for the stable operation of your elevator interaction system.
